View SS-5GL14_484790.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

( DataSheet : www..com )
SUBMINIATURE
Basic Switch
Subminiature Basic Switch
Economical, subminiature basic switch offers long service life (30 million operations minimum) s All models are free from overtravel restrictions, permit easy setting s Wide switching capacity range from microvoltage/current loads (1 mA at 5 VDC to high-capacity loads 10.1 A at 250 VAC) s Standard operating force, low force or super-low force models available
s
SS
Ordering Information
Pin plunger Hinge lever Simulated roller hinge lever Formed hinge lever Hinged roller lever
s STANDARD TYPE
Microvoltage/microcurrent load 0.1 A max. (Bifurcated crossbar contacts) Part Number PCB Terminal Straight Vertical SS-01-ED SS-01-FD SS-01D SS-01GL-ED SS-01GL-FD SS-01GLD SS-01GL13-ED SS-01GL13-FD SS-01GL13D - SS-01GL14-FD SS-01GL14D SS-01GL2-ED SS-01GL2-FD SS-01GL2D
Actuator Pin plunger
Hinge lever
Simulated roller hinge lever Formed hinge lever
Hinged roller lever
Contact OF 25 g 50 g 150 g 8g 16 g 50 g 8g 16 g 50 g 8g 16 g 50 g 8g 16 g 50 g
Parallel to Left - - SS-01D1 - - SS-01GLD1 - - - - - - - - -
Parallel to Right - - SS-01D2 - - SS-01GLD2 - - - - - - - - -
Soldered Terminal SS-01-E SS-01-F SS-01 SS-01GL-E SS-01GL-F SS-01GL SS-01GL13-E SS-01GL13-F SS-01GL13 SS-01GL14-E SS-01GL14-F SS-01GL14 SS-01GL2-E SS-01GL2-F SS-01GL2
Tab (#110) Terminal SS-01-ET SS-01-FT SS-01T SS-01GL-ET SS-01GL-FT SS-01GLT SS-01GL13-ET SS-01GL13-FT SS-01GL13T SS-01GL14-ET - SS-01GL14T SS-01GL2-ET SS-01GL2-FT SS-01GL2T
www..com
www..com
SS
General-purpose 5 A max. (Standard rivet contacts) Part Number PCB Terminal Straight Vertical SS-5-FD SS-5D SS-5GL-FD SS-5GLD SS-5GL13-FD SS-5GL13D SS-5GL14-FD SS-5GL14D SS-5GL2-FD SS-5GL2D
SS
Actuator Pin plunger Hinge lever Simulated roller hinge lever Formed hinge lever Hinged roller lever
Contact OF 50 g 150 g 16 g 50 g 16 g 50 g 16 g 50 g 16 g 50 g
Parallel to Left SS-5-FD1 SS-5D1 SS-5GL-FD1 SS-5GLD1 - SS-5GL13D1 SS-5GL14-FD1 SS-5GL14D1 SS-5GL2-FD1 SS-5GL2D1
Parallel to Right SS-5-FD2 SS-5D2 SS-5GL-FD2 SS-5GLD2 SS-5GL13-FD2 SS-5GL13D2 - SS-5GL14D2 SS-5GL2-FD2 SS-5GL2D2
Soldered Terminal SS-5-F SS-5 SS-5GL-F SS-5GL SS-5GL13-F SS-5GL13 SS-5GL14-F SS-5GL14 SS-5GL2-F SS-5GL2
Tab (#110) Terminal SS-5-FT SS-5T SS-5GL-FT SS-5GLT SS-5GL13-FT SS-5GL13T SS-5GL14-FT SS-5GL14T SS-5GL2-FT SS-5GL2T
General-purpose 10.1 A max. (Standard rivet contacts) Part Number PCB Terminal Straight Vertical SS-10D SS-10GLD SS-10GL13D SS-10GL14D SS-10GL2D
Actuator Pin plunger Hinge lever Simulated roller hinge lever Formed hinge lever Hinged roller lever
Contact OF 150 g 50 g 50 g 50 g 50 g
Parallel to Left - - - - -
Parallel to Right - - - - -
Soldered Terminal SS-10 SS-10GL SS-10GL13 SS-10GL14 SS-10GL2
Tab (#110) Terminal SS-10T SS-10GLT SS-10GL13T SS-10GL14T SS-10GL2T
s CONTACT FORM
SPDT (common throughout the series) SPST-NO* (standard models rated at 0.1 to 0.5 A) SPST-NC* (standard models rated at 0.1 to 5 A)
Sealed lead wire terminal models have color-coded leads.
* The normally open (SPST-NO) and normally closed (SPST-NC) types are not listed in the Ordering Information tables. Directly consult OMRON.
Specifications
Microvoltage/microcurrent load type General purpose/resistive load Bifurcated crossbar contacts NC NO 0.1 A 0.1 A 0.1 A 0.1 A 1 A max. 1 A max.
Contact form 125 VAC 30 VDC Inrush current
2
SS
Standard type general purpose
SS
Switch series: Contact form 125 VAC 250 VAC 8 VDC 14 VDC 30 VDC 125 VDC 250 VDC Inrush current
Rivet contacts Resistive load Lamp load Inductive load Motor load SS-5 SS-10 SS-5 and SS-10 SS-5 and SS-10 SS-5 and SS-10 NC NO NC NO NC NO NC NO NC NO 5A 5A 10.1 A 10.1 A 1.5 A 0.7 A 3A 3A 2.5 A 1.3 A 3A 3A 10.1 A 10.1 A 1A 0.5 A 2A 2A 1.5 A 0.8 A 5A 5A 10.1 A 10.1 A 2A 2A 5A 4A 3A 3A 5A 5A 10.1 A 10.1 A 2A 2A 4A 4A 3A 3A 4A 4A 4A 4A 2A 2A 3A 3A 3A 3A 0.4 A 0.4 A 0.4 A 0.4 A 0.05 A 0.05 A 0.4 A 0.4 A 0.05 A 0.05 A 0.2 A 0.2 A 0.2 A 0.2 A 0.03 A 0.03 A 0.2 A 0.2 A 0.03 A 0.03 A 20 A max. 10 A max. 20 A max. 15 A max. (both non-inductive and inductive loads)
Note: 1. The above current ratings are the values of the steady-state current. 2. Inductive load has a power factor of 0.4 min. (AC) and a time constant of 7 milliseconds max. (DC). The inductive load applicable to the SS-10 series must have a power factor of 0.75 min. 3. Lamp load has an inrush current of 10 times the steady-state current. 4. Motor load has an inrush current of 6 times the steady-state current. 5. If the switch is used in a DC circuit and is subjected to inrush current or surge, connect a surge suppressor across the switch.
s CONTACT RESISTANCE (m max., initial)
Contact rating: Normal operating force models (SS-s ) s Low operating force models (SS-s -F) s Super-low operating force models (SS-s -E) s Lead wire models (all OF types) SS-01s s 0.1 A 50 m 100 m 150 m 100 m SS-5s s 3 A or 5 A 30 m 50 m - 50 m SS-10s s 10.1 A 30 m - - -
Characteristics
Switch type Operating speed (see note 3) Operating frequency Mechanical Electrical Insulation resistance Dielectric strength Crossbar contact type Others General-purpose 0.1 mm to 1 m/second (0.004 to 39.4 in/second) 400 operations per minute (pin plunger actuator type) 60 operations per minute (pin plunger actuator type) 100 M at 500 VDC 600 VAC, 50/60 Hz for 1 minute (see note 1) 1,000 VAC, 50/60 Hz for 1 minute between terminals of same polarity 1,500 VAC, 50/60 Hz for 1 minute between current-carrying parts and ground and between each terminal and noncurrent-carrying metal parts 10 to 55 Hz, 1.5 mm double amplitude Low-OF type 500 m/s2 min. (approx. 50 g) Others 1,000 m/s2 min. (approx. 100 g) Standard type 300 m/s2 min. (approx. 30 g) Low-OF type 200 m/s2 min. (approx. 20 g) Lever type at TTP Contact gap, 1 ms max. -25 to 85C with no icing 85% RH max. 30 million operations minimum (OT: rated value) (see note 4) 200,000 operations minimum (rated load) (see note 2) Approx. 1.6 g pin plunger type
Vibration Shock
Malfunction durability Mechanical durability Malfunction durability
Ambient temperature Humidity Service life Weight Note: 1. 2. 3. 4. 5.
Operating Mechanical Electrical
SS-10 series only. 50,000 operations minimum for the SS-10 series. Applies to the pin plunger type (at the pin plunger of the lever type). 10 million operations for the SS-10 series. Data shown are of initial value. 3
SS
s CHARACTERISTIC DATA
Mechanical service life Standard type (SS-5, SS-10 series) Electrical service life Standard type (SS-5 series)
SS
Service life (x103 operations)
Overtravel (mm)
Service life (x103 operations)
Rated operating current (A)
Dimensions
Unit: mm (inch)
s STANDARD TYPE
Pin plunger SS-01 (-E, -F) SS-5 (-F) SS-10
Operating characteristics OF max. RF min. PT max. OT min. MD max. OP
Super-low force model SS-01-E 25 g 2g 0.5 mm (0.020 in) 0.5 mm (0.020 in) 0.1 mm (0.004 in) 8.4 0.5 mm (0.331 0.020 in)
Low-force models SS-01-F SS-5-F 50 g 4g 0.5 mm (0.020 in) 0.5 mm (0.020 in) 0.1 mm (0.004 in) 8.4 0.5 mm (0.331 0.020 in)
Standard models SS-01 SS-5 150 g 25 g 0.5 mm (0.020 in) 0.5 mm (0.020 in) 0.1 mm (0.004 in) 8.4 0.5 mm (0.331 0.020 in)
Standard model SS-10 150 g 25 g 0.6 mm (0.024 in) 0.4 mm (0.016 in) 0.12 mm (0.005 in) 8.4 0.5 mm (0.331 0.020 in)
Note: 1. Unless otherwise specified, a tolerance of 0.4 mm applies to all dimensions. 2. Straight vertical PCB terminal models are shown above. Soldered terminal, Tab (#10) terminal, lead wire terminal, PCB terminal parallel to left and PCB terminal parallel to right are shown in the Terminals section.
4
SS
Hinge lever SS-01GL (-E, -F) SS-5GL (-F) SS-10GL
SS
Operating characteristics OF max. RF min. OT min. MD max. FP max. OP
Super-low force model SS-01GL-E 8g 1g 1.2 mm (0.472 in) 0.8 mm (0.032 in) 13.6 mm (0.535 in) 8.8 0.8 mm (0.346 0.032 in)
Low-force models SS-01GL-F SS-5GL-F 16 g 2g 1.2 mm (0.472 in) 0.8 mm (0.032 in) 13.6 mm (0.535 in) 8.8 0.8 mm (0.346 0.032 in)
Standard models SS-01GL SS-5GL 50 g 6g 1.2 mm (0.472 in) 0.8 mm (0.032 in) 13.6 mm (0.535 in) 8.8 0.8 mm (0.346 0.032 in)
Standard model SS-10GL 50 g 6g 1.0 mm (0.039 in) 1.0 mm (0.039 in) 13.6 mm (0.535 in) 8.8 0.8 mm (0.346 0.032 in)
Simulated roller hinge lever SS-01GL13 (-E, -F) SS-5GL13 (-F) SS-10GL13
Operating characteristics OF max. RF min. OT min. MD max. FP max. OP
Super-low force model SS-01GL13-E 8g 1g 1.2 mm (0.472 in) 0.8 mm (0.032 in) 15.5 mm (0.610 in) 10.7 0.8 mm (0.421 0.032 in)
Low-force models SS-01GL13-F SS-5GL13-F 16 g 2g 1.2 mm (0.472 in) 0.8 mm (0.032 in) 15.5 mm (0.610 in) 10.7 0.8 mm (0.421 0.032 in)
Standard models SS-01GL13 SS-5GL13 50 g 6g 1.2 mm (0.472 in) 0.8 mm (0.032 in) 15.5 mm (0.610 in) 10.7 0.8 mm (0.421 0.032 in)
Standard model SS-10GL13 50 g 6g 1.0 mm (0.039 in) 1.0 mm (0.039 in) 15.5 mm (0.610 in) 10.7 0.8 mm (0.421 0.032 in)
Note: 1. Unless otherwise specified, a tolerance of 0.4 mm applies to all dimensions. 2. Straight vertical PCB terminal models are shown above. Soldered terminal, Tab (#10) terminal, lead wire terminal, PCB terminal parallel to left and PCB terminal parallel to right are shown in the Terminals section.
5
SS
Unit: mm (inch) Formed hinge lever SS-01GL14 (-E, -F) SS-5GL14 (-F) SS-10GL14
SS
Operating characteristics OF max. RF min. OT min. MD max. FP max. OP
Super-low force model SS-01GL14-E 8g 1g 1.2 mm (0.472 in) 0.8 mm (0.032 in) 14.9 mm (0.587 in) 10.1 0.8 mm (0.398 0.032 in)
Low-force models SS-01GL14-F SS-5GL14-F 16 g 2g 1.2 mm (0.472 in) 0.8 mm (0.032 in) 14.9 mm (0.587 in) 10.1 0.8 mm (0.398 0.032 in)
Standard models SS-01GL14 SS-5GL14 50 g 6g 1.2 mm (0.472 in) 0.8 mm (0.032 in) 14.9 mm (0.587 in) 10.1 0.8 mm (0.398 0.032 in)
Standard model SS-10GL14 50 g 6g 1.0 mm (0.039 in) 1.0 mm (0.039 in) 14.9 mm (0.587 in) 10.1 0.8 mm (0.398 0.032 in)
Hinged roller lever SS-01GL2 (-E, -F) SS-5GL2 (-F) SS-10GL2
Operating characteristics OF max. RF min. OT min. MD max. FP max. OP
Super-low force model SS-01GL2-E 8g 1g 1.2 mm (0.472 in) 0.8 mm (0.032 in) 19.3 mm (0.760 in) 14.5 0.8 mm (0.571 0.032 in)
Low-force models SS-01GL2-F SS-5GL2-F 16 g 2g 1.2 mm (0.472 in) 0.8 mm (0.032 in) 19.3 mm (0.760 in) 14.5 0.8 mm (0.571 0.032 in)
Standard models SS-01GL2 SS-5GL2 50 g 6g 1.2 mm (0.472 in) 0.8 mm (0.032 in) 19.3 mm (0.760 in) 14.5 0.8 mm (0.571 0.032 in)
Standard model SS-10GL2 50 g 6g 1.0 mm (0.039 in) 1.0 mm (0.039 in) 19.3 mm (0.760 in) 14.5 0.8 mm (0.571 0.032 in)
Note: Unless otherwise specified, a tolerance of 0.4 mm applies to all dimensions.
s MOUNTING HOLES
Standard types Mounting holes below are for reference only.
Note: Unless otherwise specified, a tolerance of 0.4 mm applies to all dimensions. 6
SS
s TERMINALS
General-purpose type PCB terminal, straight vertical (D) PCB terminal, parallel to left (D1)
SS
PCB terminal, parallel to right (D2)
Note: Thickness of all the terminals is 0.5 mm.
Soldered terminal (blank)
Quick-connect tab (#110) terminal (T)
s APPROVALS
UL (File No. E41515)/CSA (File No. LR21642) Type SS-10 series SS-5 series SS-01 series VDE (File No. 5861-3221) Type SS-5 series SEMKO (File Nos. 43-8614026/43-891609) Type SS-10 series SS-5 series Rating 10 A, 250 VAC 5 A, 250 VAC Rating 5 A, 250 VAC Rating 10.1 A, 250 VAC 5 A, 125 V, 3 A 250 VAC 0.1 A, 125 VAC, 30 VDC
General-purpose type General-purpose type Super-low force type
General-purpose type
General-purpose type General-purpose type
Note: The rated values approved by each of the safety standards (e.g. UL, CSA) may be different from the performance characteristics individually defined in this catalog.
OMRON ELECTRONICS, INC.
One East Commerce Drive Schaumburg, IL 60173
OMRON CANADA, INC.
885 Milner Avenue Scarborough, Ontario M1B 5V8
1-800-55-OMRON
Cat. No. GC SW5 4/98 Specifications subject to change without notice.
416-286-6465
Printed in the U.S.A. 7

▲Up To Search▲

Price & Availability of SS-5GL14

	To Download SS-5GL14 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .